Showing 1285–1296 of 1634 results
Paintdirect PD Machinery & Industrial Colours
146E Grey and 148E Black are Fast Drying, 1K Industrial Acid Epoxy Etch Primers.
240P Primer Light Grey – It’s High Build and outstanding corrosion resistance makes it an ideal shop and field industrial primer. It is the ideal base colour for all bright colours. It can be overcoated with 1K and 2K topcoats.
260P Hi-Build Sanding Primer – A fast drying, good filling primer surfacer. Ideal for the preparation of steel subframes, chassis, interior and exterior bodywork. May be applied to properly prepared base metals and most previously painted surfaces. Easy sand preperation primer.
712P White MDF Sanding Primer – A fast drying, good filling primer surfacer. Ideal for the preparation of small MDF articles or covering rub throughs when 2K primer has been sanded off the edges of MDF doors or panels.
Paintdirect PD Primer Aerosols
146E Grey and 148E Black are Fast Drying, 1K Industrial Acid Epoxy Etch Primers.
240P Primer Light Grey – It’s High Build and outstanding corrosion resistance makes it an ideal shop and field industrial primer. It is the ideal base colour for all bright colours. It can be overcoated with 1K and 2K topcoats.
260P Hi-Build Sanding Primer – A fast drying, good filling primer surfacer. Ideal for the preparation of steel subframes, chassis, interior and exterior bodywork. May be applied to properly prepared base metals and most previously painted surfaces. Easy sand preperation primer.
712P White MDF Sanding Primer – A fast drying, good filling primer surfacer. Ideal for the preparation of small MDF articles or covering rub throughs when 2K primer has been sanded off the edges of MDF doors or panels.
Festool-150mm 3mm & 5mm Random Orbital Sander (in Systainer)
The ETS 150/3 is a favorite for fine sanding and extra-fine sanding, producing an excellent surface finish with a short 1/8” (3.0 mm) stroke. The ETS 150/5, with a 3/16” (5.0 mm) stroke, is perfect for light sanding or intermediate sanding. Both feature a rubberized top grip, ergonomic handle, finger tip switch and vibration-stop balancing to reduce the discomfort normally associated with sanding.[more]
Jetstream dust extraction improves the surface finish by removing dust particles as they are generated, while at the same time, prolonging pad and abrasive life. With soft-start, step-less speed controls, and constant speed under load, these sanders perform on a level that you are not likely to have experienced.
Platinum Plus Body Filler – ultra Low Shrink
Most panel shops will have two fillers on their shelves, a traditional lightweight body filler and a fine filler (normally referred to as a flowable glaze or putty). In the panel rectification process there are two areas where the flowable glaze is traditionally used. Firstly, filling in pin holes from traditional
filler applications and secondly to fill in fine scratches over paint work. An acceptable finish is obtained in both of these applications.
The issue with having two fillers on the shelves is additional cost of the fine filler, which generally off sets the savings made from spending less on a lightweight body filler. So, is it possible to get fine filler performance from a traditional lightweight body filler? With the introduction 3MPlatinum Plus Body Filler, this is definitely the case.
8mm Hose with 1/4″ BSP Brass Female Fittings
Ideal Air Hose for Spray Painting, Air Tools, or Pressure Pots
32mm 3mm Orbit Nib Sander
PdAir Mini Nib Removal sander, this denibber incorporates a 3mm orbit with a small 30mm velcro pad, designed to make easy work of denib sanding using daisy disk . Comes with a lightweight precise speed controller and 30mm interface pad. 0~12,00 rpm, Weight 500 grams.
- Free Speed [RPM] 12,000
- Sound Level [dB(A)] 80
- Air Inlet [NPT] 1/4″ Female
- Minimum Hose Size [mm] 8
- Recommended Air Pressure [kPa (PSI) ] 620 (90)
- Length [mm (inch)] 197 (7-7/8)
- Weight [Kg (Lbs)] 0.5 (1.1)
- Average Air Consumption [CFM (L/Min)] 1 (28.3)
- Pad Size [mm (inch)] 32 (1-1/4)
75mm Oil Free 2.5mm Orbit Palm Buffer
PdAir Oil Free 75mm x 2.5mm Random Orbit Palm Buffer, Variable speed 0~12,00 rpm, Pad 75mm Velcro, Weight 600 grams, this is such an ergonomic mini buffer, comfortable, contoured palm fit with easy on/off action, ideal for small area repairs and hard to access buffing areas. Use with 75mm Pads & Radex 1-Step compound.
- Free Speed [RPM]: 12,000
- Sound Level [dB(A)]: 76
- Air Inlet [NPT]: 1/4″
- Female Minimum Hose Size [mm]: 8
- Recommended Air Pressure [kPa (PSI) ]: 620 (90)
- Length [mm (inch)]: 132 (5-3/16)
- Weight [Kg (Lbs)]: 0.6 (1.4)
- Average Air Consumption [CFM (L/Min)]: 2 (57)
- Pad Size [mm (inch)]: 75 (3) PDP-75BBP
Multifunction Palm Ratchet
PdA Multi-Function mini palm Ratchet, This amazing slim compact air ratchet is the ultimate in versatility and useful design. Simply click in the 1/4?-3/8? anvil for forward or reverse action, ready to take your standard socket bits. Otherwise slip in the 1/4? Hex bit holder, turning you ratchet into a tight compact forward reverse screwdriver. Multi Function or Multi Talented.
Also Includes:
- 1/4” & 3/8” Anvil
- 1/4” Bit Holder
- #1 & #2 Screwdriver Phillips Bits
- 4.5 & 6.5 Screwdriver Slotted Bits
3/8″ STUBBY AIR RATCHET
Product Description
Handy and versatile Yato 3/8″ Stubby Air Ratchet
- fits 3/8″ Socket bits
- 34Nm Torque
- 0-300 RPM
- 51L/Min
1/2″ SLIM AIR RATCHET
Product Description
Powerful Slim Yato 1/2″ Air Ratchet. Strong sturdy construction
- Suits 1/2″ socket bits
- 95Nm Torque
- 0 to 160 RPM
- 71L/Min
PdAir Dust Extractor Filter Bags and Motor Filters
PdAir Disposable Dust Extractor Filter Bags. Suitable for use in Festool CT26. CT33, CT36 Dust Extractors
Quality 1/2″ Heavy Duty Filter Regulator
This 1/2” Heavy Duty Filter Regulator is ideal for virtually all spray shops. It’s high output, approx 6,000L/min, and heavy duty construction ensures a long service life. Easily removed polycarbonate bowl for quick cleaning maintenance if required. Includes wall mounting bracket.