Showing all 9 results
6mm Nap Mohair Cover, ideal for use with oil based gloss enamels and polyurethanes.
10mm Nap Pro Universal Wall Finish Roller Covers, ideal for use with any oil based or water based paints.[more]
Get the best out of your Roller Covers!
Half fill the well of the tray with paint and dip the roller in. It should be a little less than half submerged.
Lift the roller and roll it down the sloped grating two or three times – but not back into the paint.
Start painting with a zig zag. Ensuring that you don’t dry out the roller. Pre wash the roller before use to remove any loose fibres. Rinse well and shake out any excess water.
Dip the roller into the paint once more and roll it on the grating until cover has been evenly saturated. Do not overload the roller or it will drip and slide, producing a uneven coat.
Don’t use cheap poor quality roller sleeves when painting industrial coating such as Epoxy Floor Coatings, Polyurethane Finishes and Anti-Fouling products. You don’t want roll fibre all through your job or your cover breaking during the application process.
Get the best out of your Roller Covers!
The Great Roller Kit is made for the DIY. There are three types depending on the size of tray required. Each kit contains a durable tray, roller frame with a wire cage and a flat paint sleeve. These kit is ready for almost every job around the home or office. These are the perfect economical kit.
The Nook & Cranny is great for those difficult places that you can’t get with a brush! These slim rollers with long reach handles are indispensable in the painters kit and are great for those hard to reach spots behind pipes, above windows and above cupboards.
This Roller Tray is made out of durable polypropylene. Ribbed to allow roller to load correctly.
1.2m & 1.8m threaded wooden pole, 1.8 ~ 2.4 Steel Poles all suitable for Roller Frame.
