Showing 1–12 of 1573 results

1K Epoxy Etch & Protect Primer

146e Light Grey Epoxy Etch Primer
Now also available in 147e White & 148e Black 

This high performance epoxy etch primer is capable of giving key adhesion to common structural metals such as mild steel aluminium zincalume brass copper and sanded stainless steel.

  • Can be over coated with nearly all Evic top coat finishes.
  • Fast Dust Dry in 10mins, Top Coat  from as early as 1 hour
  • Single 1 coat application new formula leaves a very smooth finish which enhances top coat appearance.
  • Normally Spray Applied, small areas can be brushed
  • Apply one even double header coat to uniform coverage (Do not apply extra or thick coat)
  • Thin 10-30% with Evic 145S or 120S Epoxy Solvent.
CODE NAME 1 Each QTY
$28.50
$31.50
$90.00
$92.00
$318.00
$345.00

Prices quoted are per unit and exclude GST.

x

1K GMH Black

GMH Black is an extremely fast drying lacquer finish, which is used extensively for coating under panels of automotive vehicles and other transport.

Commonly used on Radiators

Popular use is as a “Guide Coat” on primers to aid in sanding. An extremely  light coat of black is applied over the primer, when sanding low spots or imperfections will show as the blackish coat which will stay visible until those primer areas are fully smoothed out.

Thinner;  Evic 145S Acrylic, Lacquer, Epoxy Etch Solvent

CODE NAME 1 Each QTY
$23.00
$208.00

Prices quoted are per unit and exclude GST.

x

1K Transparent Plastic Primer & Antistatic Solvent

EVIC 126P is a clear fast drying plastic primer ideal for most industrial & automotive plastic components. 126P is relatively concentrated and should be thinned with Evic 145S, 830S or 850S,

Simply apply 2 light smooth even coats, dust free in 5 to 10 minutes, top coat from 30 minutes to 7 days

EVIC 128S When sanding & working with plastic surfaces, static and cleaning can be an ever present issue. Evic 128S is an Anti-Static Plastic Degreaser-Cleaner that should always be used when plastic’s are been worked on.

 

CODE NAME 1 Each QTY
$37.10
$116.00
$428.00
$20.00
$50.00
$182.00

Prices quoted are per unit and exclude GST.

x

1K Temporary Peelable Coating – Purple Blue

208T Temporary Peelable Coating, offers protection of substrates and surfaces from paint overspray, dirt, dust and other contaminates.

Suitable for the back of panels ( Kitchen Doors etc) and other objects which are subject to overspray during painting. Can protect the walls of spray booths and areas but 208T is a blue colour not clear and transparent.

CODE NAME 1 Each QTY
$290.10

Prices quoted are per unit and exclude GST.

x

1K 240-245P Highlander Zinc Phosphate Primer

240P Light Grey Highlander & 245 Red Oxide
High Performance – Containing Zinc Phosphate HighlanderTM provides excellent protection for steel.
High Build – Allows for build up to 185 microns which increases protection of the substrate.
Fast Dry – Quick turnaround time in application means less waiting.
Single Pack – Highlander is easy to apply and recoat.
Overcoating – Highlander is strong enough to be over-coated with 1K-Enamel 2K-Epoxy & 2K Polyurethane.
Note; the light grey colour of 240P is the most ideal colour for easier overcoating of bright prime colours i.e. Yellows Reds Lime Green Oranges etc. 240P is the most effective base coat colour.
240P Can be tinted easily to Mid Grey & Deep Grey and some other colours using your Xtint Colourants
Thin with Evic 220S Fast or 620S Medium Enamel Solvent
CODE NAME 1 Each QTY
$26.00
$69.65
$278.00
$26.00
$69.65
$278.00

Prices quoted are per unit and exclude GST.

x

1K 260P Light Grey Rapid Primer Filler. Fast Drying Easy Sanding Surfacer

Paintdirect 260P

260P Acrylic Primer Filler is a fast drying single pack primer filler all in one. It has been engineered for use with Paintdirect Polynamel and or acrylic lacquer top coats. It is formulated for direct application over Bare Metal Body Filler Fiberglass Repairs and minor damage such as stone chips and pitting.

260P Acrylic Primer can be used over:[more]

  • Original finishes in good sound condition. (Not fresh air dry enamels).
  • Properly prepared bare steel surface.
  • Most properly prepared plastic surfaces.
  • Properly prepared fiberglass surfaces.
  • Polyester Body Filler
  • Single Pack and Two Pack Etch Primers

• If the steel body is blasted or sanded and will be left bare for a period apply a coat of Vinyl Etch to protect the surface from corrosion until work commences.

• Note: Do NOT apply over cracked or perished paint work or where thickness of old paint exceeds 250 microns.

Thin with Evic 145S Acrylic Epoxy Thinner

CODE NAME 1 Each QTY
$28.00
$94.90
$380.00

Prices quoted are per unit and exclude GST.

x

1K White MDF Sanding Primer

Fast Drying Easy Sanding Surfacer.

A fast drying, good filling primer surface. Ideal for the preparation of small MDF articles or covering rub throughs when 2K primer has been sanded off the edges of MDF doors or panels

Thin with Evic 145S Acrylic Epoxy Thinner

 

CODE NAME 1 Each QTY
$31.00
$89.00
$355.00

Prices quoted are per unit and exclude GST.

x

Xpress 660 Part A M.S. Bases

Xpress Tints 660 Range of Medium Solid Polyurethane Bases

Available in Gloss 60% 30% and Metallic

CODE NAME 1 Each QTY
$191.50
$180.00
$191.50
$180.00
$191.50
$180.00
$314.25
$298.50
$314.25
$298.50
$314.25
$298.50

Prices quoted are per unit and exclude GST.

x

660 Standard Colours – 30% – 15L

Xpress Tint 30% Standard Colours are Factory Project matches to the Xtint Colour Standard for these Colours.

These Colours are manufactured using XB668 30% White Base

Save time and money by stocking whichever of these popular colours are part of your standard “request repertoire”

CODE NAME 1 Each QTY
$324.00

Prices quoted are per unit and exclude GST.

x

660 Standard Colours – 60% – 15L

Xpress Tint 60% Standard Colours are Factory Project matches to the Xtint Colour Standard for these Colours.

These Colours are manufactured using XB664 60% White Base

Save time and money by stocking whichever of these popular colours are part of your standard “request repertoire”

CODE NAME 1 Each QTY
$324.00

Prices quoted are per unit and exclude GST.

x

660 Standard Colours – Gloss – 15L

Xpress Tint Gloss Standard Colours are Factory Project matches to the Xtint Colour Standard for these Colours.

These Colours are manufactured using XB661 Gloss White Base

Save time and money by stocking whichever of these popular colours are part of your standard “request repertoire”

CODE NAME 1 Each QTY
$324.00

Prices quoted are per unit and exclude GST.

x

Xpress 690 Low Sheen Part A 15L Bases

Xpress Tints 690 Range of Low Sheen Polyurethane Bases

Beautiful Fast Applying & Curing Peel and Patchiness Free low gloss Finishes….it’s that simple 

Specifically designed for Evic’s Xpress Tint 690 is the most comprehensive range of Bases designed to offer the XTint users a unique opportunity to in-house create colours in 6 different gloss levels.

Now available in a Part A bases of  10% 20% 30% 45% 60% & 80% finishes

 

CODE NAME 1 x 15L QTY
$314.25
$298.50
$314.25
$298.50
$314.25
$298.50
$314.25
$298.50
$314.25
$298.50
$314.25
$298.50

Prices quoted are per unit and exclude GST.

x