Voodoo Flexi Mixing Spray Cups

We’re excited to introduce our NEW Voodoo Flexi Mixing Spray Cups
Simple – Fast – Clean
Step 1: Take the Liner and place it into the Graduated Mixing Retainer
Step 2: Using the graduated scales on the retainer, mix your paint directly in the liner using the correct ratios shown on the retainer or place the unit on scales and weigh your paint. Thoroughly stir till uniform.
Step 3: Take the lid and firmly secure it into the plastic liner. You can use the retaining collar to push the lid snugly into position.Twist the Collar clockwise, locking into the protruding tabs of the retainer creating a tight seal.
Step 4: If the paint is not required immediately you can seal the lid using the small black caps provided or after fitting the appropriate Voodoo Adaptor to your gravity gun. Simply turn the gun over, push down on the cup and lock it on with a half turn.
Step 5: Turn the gun upright, connect air, pull the trigger to take out any air from the system. During the spraying the suction effect will slowly collapse the liner as the paint is used.

PLEASE NOTE You will need an adaptor to suit your gravity gun:
VD-EA02 Male 3/8inch Male Thread (suit GTI and similar)
VD-EA04 M16 Female Thread (suit Iwatta, Star, Voodoo and similar)

Kits Available:
50 x 650mL Cups with 125um Filter lids. 20xCaps, 1 Graduation Holder & Collar
50 x 650mL Cups with 190um Filter lids. 20xCaps, 1 Graduation Holder & Collar
50 x 850mL Cups with 125um Filter lids. 20xCaps, 1 Graduation Holder & Collar