11mm, 22mm & 32mm Surface Pro Roller Covers

11mm Nap Regular surfaces
22mm Nap Semi-rough surfaces
32mm Nap rough surfaces.

Ideal for use with all flat, low sheen & gloss water based paints.[more]

Get the best out of your Roller Covers!

Half fill the well of the tray with paint and dip the roller in. It should be a little less than half submerged.

Lift the roller and roll it down the sloped grating two or three times – but not back into the paint.

Start painting with a zig zag. Ensuring that you don’t dry out the roller. Pre wash the roller before use to remove any loose fibres. Rinse well and shake out any excess water.

Dip the roller into the paint once more and roll it on the grating until cover has been evenly saturated. Do not overload the roller or it will drip and slide, producing a uneven coat.