Evic Group Market Leader in Polyurethane Coatings

Outside Micrometers

All sizes at Wholesale Prices SAVE $$$

Product Description

  • Measuring range
  • YT-72300 0-25mm
  • YT-72301 25-50mm
  • YT-72302 50-75mm
  • YT-72303 75-100mm
  • Accuracy: 0.01 m

How to use [more]

– Clean the contact surfaces and the guide. For this purpose, use a cotton cloth. Do not use solvents or acids.
– Check the zero position and, if necessary, adjust the key attached, so that the line described “0” on the drum coincides with the horizontal line of the scale. Measuring method: – The drum can be rotated only after unlocking the retaining clip. – Slide measuring surfaces at a distance slightly greater than the measured object. – Then by turning the drum set roughly, and then continue to tighten by turning the clutch. – Stop tighten the clutch work, a further rotation of the knob will not cause rotation of the drum. – Read the measurement result of the measuring principle shown. Recommended is the attachment of an item or a micrometer before measurement. This will achieve the greatest accuracy of measurement. It is recommended also to perform several measurements in order to obtain the arithmetic average of the results.

SKU: YT-73125P Category:
CODE TYPE Each
$38.00
$40.00
$45.00
$49.00
Prices quoted are per unit and exclude GST.

Product Description

  • Measuring range
  • YT-72300 0-25mm
  • YT-72301 25-50mm
  • YT-72302 50-75mm
  • YT-72303 75-100mm
  • Accuracy: 0.01 m

How to use [more]

– Clean the contact surfaces and the guide. For this purpose, use a cotton cloth. Do not use solvents or acids.
– Check the zero position and, if necessary, adjust the key attached, so that the line described “0” on the drum coincides with the horizontal line of the scale. Measuring method: – The drum can be rotated only after unlocking the retaining clip. – Slide measuring surfaces at a distance slightly greater than the measured object. – Then by turning the drum set roughly, and then continue to tighten by turning the clutch. – Stop tighten the clutch work, a further rotation of the knob will not cause rotation of the drum. – Read the measurement result of the measuring principle shown. Recommended is the attachment of an item or a micrometer before measurement. This will achieve the greatest accuracy of measurement. It is recommended also to perform several measurements in order to obtain the arithmetic average of the results.

Weight 1 kg